Nose Gear Guides

After the guide parts were edge-filled with micro, cured, and sanded, they were tacked into place with hot glue.  Care was taken to make the guides vertical, flush with the door opening, and spaced appropriately from the nose gear axle.  Once tacked into place and clamped, the supports were tacked in place, and then the joints were filleted with cabo and covered with 2x BID.

Author: bzvelocity

Building a Velocity XLRG-5

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s